Ricoh Pro 8100s User Manual page 206

9. Troubleshooting
Messages
"Exceeded max. page capacity
per file. Press [Send] to send the
scanned data, or press [Cancel]
to delete."
"Exceeded maximum number of
file to store. Delete all
unnecessary files."
When the WSD scanner function cannot be used
Messages
"Cannot communicate with PC.
Contact the administrator."
"Cannot start scanning because
communication was failed."
"Cannot start scanning because
communication was failed."
"Cannot start scanning. Check
the setting(s) on the PC."
198
Causes
The number of scanned pages
exceeded the maximum page
capacity.
Too many files are waiting to be
delivered.
Causes
WSD (Device) protocol or WSD
(Scanner) protocol is disabled.
Scan Profile is not set on the
client computer.
The [Take no action] setting has
been selected on the client
computer, forcing the client
computer to remain inactive
when it receives scan data.
The Scan Profile might be
incorrectly configured.
Solutions
Select whether to send the data
that has already been scanned.
Try again after they have been
delivered.
Solutions
For details about how to enable
or disable the WSD protocol,
see Security Guide .
Set Scan Profile. For details
about how to do this, see
"Creating a New Scan Profile",
Scan .
Open scanner properties, click
the [Events] tab, and then select
[Start this program] as the
computer's response on receipt
of scan data. For details, see
your operating system's Help.
Check the Scan Profile
configuration.