Ricoh Pro 8100s User Manual page 183

Messages
"Paper size and type are
mismatched. Select another tray
from the following and press
[Continue]. To cancel job, press
[Job Reset]. Paper size and type
can also be changed in User
Tools."
"Paper size of n is mismatched.
Select another tray from the
following and press [Continue].
Paper type can also be
changed in User Tools."
(A tray name is placed at n.)
"Parallel I/F board has a
problem."
Causes
The printer driver settings are
incorrect or the tray does not
contain paper of the size or
type selected in the printer
driver.
The size of the paper in the tray
does not match the paper size
specified in the printer driver.
An error has occurred in the
IEEE 1284 interface board.
Messages Displayed When Using the Printer Function
Solutions
• Check that the printer
driver settings are correct,
and then load paper of the
size selected in the printer
driver into the input tray.
For details about how to
change the paper size, see
"Changing the Paper
Size", Paper Specifications
and Adding Paper
• Select the tray manually to
continue printing, or
cancel a print job. For
details about how to select
the tray manually, or
cancel a print job, see "If
an Error Occurs with the
Specified Paper Size and
Type", Print
Select a tray containing paper
that is the same size as the
specified paper size.
Turn off the power, and then
back on again. If the message
appears again, contact your
service representative.
.
.
175