Ricoh Pro 8100s User Manual page 201

Messages
"Check original's orientation."
"Exceeded max. data capacity."
"Check scanning resolution,
then press Start key again."
"Exceeded max. data capacity."
"Check the scanning resolution,
then reset n original(s)."
("n" in the message represents a
changeable number.)
"Exceeded max. data capacity."
"Check the resolution and the
ratio and then press the Start
key again."
"Exceeded max. number of files
which can be used in Document
Server at the same time."
Messages Displayed When Using the Scanner Function
Causes
Documents may sometimes not
be scanned depending on a
combination of items such as the
specified scaling factor and
document size.
The scanned data exceeded
maximum data capacity.
The scanned original exceeded
maximum data capacity.
The data being scanned is too
large for the scale ratio
specified in [Specify Size].
The maximum number of files
that can be stored in the
Document Server has been
exceeded.
Solutions
Change the orientation of the
original, and then try to scan the
original again.
Specify the scan size and
resolution again. Note that it
may not be possible to scan
very large originals at a high
resolution. For details about the
settings for the scanner function,
see "Relationship between
Resolution and Scan Size",
Scan .
Specify the scan size and
resolution again. Note that it
may not be possible to scan
very large originals at a high
resolution. For details about the
settings for the scanner function,
see "Relationship between
Resolution and Scan Size",
Scan .
Reduce the resolution or
[Specify Size] value, and then
try to scan the original again.
Check the files stored by the
other functions, and then delete
unneeded files. For details
about how to delete files, see
"Deleting Stored Documents",
Copy/ Document Server .
193