Ricoh Pro 8100s User Manual page 196

9. Troubleshooting
Messages
"Failed to obtain file system."
"File system is full."
"Folding Unit Error."
"I/O buffer overflow."
188
Causes
PDF direct printing could not be
performed because the file
system could not be obtained.
PDF file does not print out
because the capacity of the file
system is full.
There is a problem with the
multi-folding unit.
An input buffer overflow
occurred.
Solutions
Turn off the power, and then
back on again. If the message
appears again, contact your
service representative.
• Delete all unnecessary files
from the hard disk.
• Decrease the file size sent
to the machine.
Contact your service
representative.
• In [Printer Features], under
[Host Interface], select
[I/O Buffer], and then set
the maximum buffer size to
a larger value.
• Reduce the number of files
being sent to the machine.