Ricoh Pro 8100s User Manual page 194

9. Troubleshooting
Messages
"You do not have a privilege to
use this function. This job has
been cancelled."
"You do not have a privilege to
use this function. This operation
has been cancelled."
When a user cannot be registered
Messages
"Auto-registration of user
information has failed."
"Information for user
authentication is already
registered for another user."
When other errors occur
Messages
"98: Error"
186
Causes
The logged in user is not
allowed to use the selected
function.
The logged in user does not
have the privileges to register
programs or change the paper
tray settings.
Causes
Automatic registration of
information for LDAP
Authentication or Windows
Authentication failed because
the Address Book is full.
The user name for LDAP or
Integration Server
authentication was already
registered in a different server
with a different ID, and a
duplication of the user name
occurred due to a switching of
domains (servers), etc..
Causes
The machine could not access
the hard disk correctly.
Solutions
For details about how to set
permissions, see Security Guide
.
For details about how to set
permissions, see Security Guide
.
Solutions
For details about automatic
registration of user information,
see Security Guide .
For details about user
authentication, see Security
Guide .
Solutions
Turn off the power, and then
back on again. If the message
appears frequently, contact
your service representative.