Ricoh Pro 8100s User Manual page 209

Messages
"Any of Login User Name, Login
Password or Driver Encryption
Key is incorrect."
"Authentication succeeded.
However, the access privileges
for scanner function has been
denied."
"Cannot add any more
scanning mode."
"Cannot detect the paper size of
the original. Specify the
scanning size."
"Cannot specify any more
scanning area."
Messages Displayed When Using the Scanner Function
Causes
The entered login user name,
login password, or driver
encryption key was invalid.
The logged in user name does
not have permission for scanner
function.
The maximum number of
registerable scan modes has
been exceeded.
The set original was misaligned.
The maximum number of
registerable scan areas has
been exceeded.
Solutions
Check your login user name,
login password, or driver
encryption key, and then enter
them correctly. For details about
login user name, login
password, and driver
encryption key, see Security
Guide .
For details about how to set
permissions, see Security Guide
.
The maximum number of modes
that can be stored is 100.
Delete unneeded modes.
• Place the original correctly.
• Specify the scan size.
• When placing an original
directly on the exposure
glass, the lifting/lowering
action of the ADF triggers
the automatic original size
detection process. Lift the
ADF by 30 degrees or
more.
The maximum number of
scanning areas that can be
stored is 100. Delete unneeded
scanning areas.
201