Ricoh Pro 8100s User Manual page 141

of the paper, the machine may not detect a multi-sheet feed correctly. For details about Adjustment
Settings for Operators, see "Adjustment Settings for Operators", Paper Settings
• Flatten out curled sheets before loading them.
• The Adjust Paper Curl function might not be able to fully remove curl, depending on the type of
paper and the direction of its grain. If long grain paper does not uncurl properly, try short grain
paper instead. For details about the Adjust Paper Curl function, see "Adjustment Settings for
Operators", Paper Settings
• Depending on the paper's size, weight, and type, the copy/print speed may be slower than usual.
• When loading thick paper of 163.1–300.0 g/m
page 134 "Thick paper".
• When loading envelopes, see page 135 "Envelopes".
• When copying or printing onto letterhead paper, the paper placing orientation is different
depending on which function you are using. For details, see page 114 "Loading Orientation-fixed
Paper or Two-sided Paper".
• If you load paper of the same size and same type in two or more trays, the machine automatically
feeds from one of the trays in which [Yes] is selected for [Apply Auto Paper Select] when the first
tray in use runs out of paper. This function is called Auto Tray Switching. This saves interrupting a
copy run to replenish paper when making a large number of copies. You can specify the paper
type of the paper trays under [Paper Type] tab. For details, see "Tray Paper Settings", Paper
Settings . For the setting procedure of the Auto Tray Switching function, see "General Features",
Copy/ Document Server
• When loading label paper:
• We recommend that you use specified label paper.
• It is recommended to load the paper in
• Select [Label Paper] for [Paper Type] in [Tray Paper Settings], and select an appropriate
paper thickness under [Paper Weight].
• When loading OHP transparencies:
• We recommend that you use specified OHP transparencies.
• It is recommended to place one sheet at a time.
• When copying onto OHP transparencies, see "Copying onto OHP Transparencies", Copy/
Document Server
• Fan OHP transparencies thoroughly whenever you use them. This prevents OHP
transparencies from sticking together, and from feeding incorrectly.
• Remove copied or printed sheets one by one.
• It is recommended to load the paper in
• When loading translucent paper:
• It is recommended to place one sheet at a time.
.
2
.
orientation.
.
orientation.
(60.1 lb. Cover–165.0 lb. Index), see
Recommended Paper
.
133