Ricoh Pro 8100s User Manual page 175

Messages
"Cannot display preview of
this page."
"Cannot punch this paper
size."
"Cannot staple paper of this
size."
"Check paper size."
"Duplex is not available with
this paper size."
"Exceeded the maximum
number of sheets that can be
used. Copying will be
stopped."
"Exceeded the maximum
number of multi-sheet fold.
Printing will be cancelled."
Messages Displayed When Using the Copy/Document Server Function
Causes
The image data may have
been corrupted.
The Punch function cannot
be used with paper size
selected.
The Staple function cannot
be used with paper size
selected.
An irregular paper size is
set.
A paper size not available in
Duplex mode has been
selected.
The number of pages the
user is permitted to copy has
been exceeded.
A print job was canceled
because more than the
maximum number of Multi-
sheet Fold was specified.
Solutions
Press [Exit] to display the preview
screen without a thumbnail. If the
selected document contains several
pages, press [Switch] on the "Display
Page" area to change the page, and
then a preview of the next page will
appear.
Select a proper paper size. For details
about proper paper sizes, see
"Specifications for Punch Unit",
Maintenance and Specifications
Select a proper paper size. For details
about proper paper sizes, see
"Specifications for Finisher SR5050" or
"Specifications for Booklet Finisher
SR5060", Maintenance and
Specifications .
If you press the [Start] key, the copy
will start using the selected paper.
Select a proper paper size. For details
about proper paper sizes, see "Duplex
Copying", Copy/ Document Server
.
For details about how to check the
number of copies available per user,
see Security Guide .
Specify fewer sheets for the Multi-sheet
Fold function. For details about the
maximum number of Multi-sheet Fold,
see "Specifications for Multi-Folding
Unit", Maintenance and Specifications
.
.
167