Intel BX80623I52500K Specification page 50

Specification update
Table of Contents

Advertisement

Workaround:
Do not place page directories and/or page tables in WC memory.
Status:
For the steppings affected, see the Summary Tables of Changes.
51.
Buffer on Resistance May Exceed Specification
Problem:
The datasheet specifies the resistance range for R
AGTL+ and Asynchronous GTL+ buffers as 5 to 11 Ohms. Due to this erratum, R
may be as high as 13.11 Ohms.
Implication: The R
ON
signal low. A higher R
specifications such as V
designs may or may not have sufficient margin to function properly with an increased
R
. System designers should evaluate whether a particular system is affected by this
ON
erratum. Designs that follow the recommendations in the Intel
Processor and Intel
affected.
Workaround:
No workaround is necessary for systems with margin sufficient to accept a higher
R
.
ON
Status:
For the steppings affected, see the Summary Tables of Changes.
52.
Processor Issues Inconsistent Transaction Size Attributes for Locked
Operation
Problem:
When the processor is in the Page Address Extension (PAE) mode and detects the
need to set the Access and/or Dirty bits in the page directory or page table entries,
the processor sends an 8 byte load lock onto the system bus. A subsequent 8 byte
store unlock is expected, but instead a 4 byte store unlock occurs. Correct data is
provided since only the lower bytes change, however external logic monitoring the
data transfer may be expecting an 8-byte store unlock.
Implication: No known commercially available chipsets are affected by this erratum.
Workaround:
None identified.
Status:
For the steppings affected, see the Summary Tables of Changes.
53.
Multiple Accesses to the Same S-State L2 Cache Line and ECC Error
Combination May Result in Loss of Cache Coherency
Problem:
When a Read for Ownership (RFO) cycle has a 64-bit address match with an
outstanding read hit on a line in the L2 cache which is in the S-state AND that line
contains an ECC error, the processor should recycle the RFO until the ECC error is
handled. Due to this erratum, the processor does not recycle the RFO and attempts
to service both the RFO and the read hit at the same time.
Implication: When this erratum occurs, cache may become incoherent.
Workaround:
None identified.
Status:
For the steppings affected, see the Summary Tables of Changes.
50
value affects the voltage level of the signals when the buffer is driving the
may adversely affect the system's ability to meet
ON
. As the system design also affects margin to specification,
IL
®
850 Chipset Platform Design Guide are not expected to be
(Buffer On Resistance) for the
ON
®
Pentium
Specification Update
Errata
ON
®
4

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pentium 4

Table of Contents