Dell Force10 C150 Configuration Manual page 923

To assign commands and passwords to a custom privilege level, you must be in privilege level 15 and use
these commands in the following sequence in the CONFIGURATION mode:
Step Command Syntax
username name
1
] [
access-list-name
nopassword | password
[
[ ]
encryption-type
enable password
2
[
encryption-mode
privilege mode level level command
3 {
reset command
| }
To view the configuration, use the
Figure 45-2 is an example of a configuration to allow a user "john" to view only the EXEC mode
commands and all
commands and, by default, found in the CONFIGURATION mode, you must also assign the launch
command for the CONFIGURATION mode,
commands.
Command Mode
access-class
[ CONFIGURATION
privilege level
]
]
password
level level
[ ] CONFIGURATION
]
password
CONFIGURATION
show running-config
snmp-serve
r commands. Since the
Purpose
Assign a user name and password. Configure the
optional and required parameters:
• name:
characters).
access-class access-list-name:
•
name of a configured IP ACL.
privilege level
•
nopassword:
•
enter a password.
•
encryption-type:
encrypted text.
•
password:
Configure a password for privilege level.
Configure the optional and required parameters:
level level:
•
includes all levels.
• encryption-type:
encrypted text.
• password:
long.
To change only the password for the enable
command, configure only the
parameter.
Configure level and commands for a mode or
reset a command's level. Configure the
following required and optional parameters:
•
mode:
configure, interface, line, route-map, router)
level level
•
are pre-configured. Levels 2 to 14 are
available for custom configuration.
•
command:
keywords allowed).
reset:
•
privilege mode.
command in the EXEC Privilege mode.
snmp-server
commands are "enable" level
configure
, to the same privilege level as the
Enter a text string (up to 63
Enter the
range: 0 to 15.
Do not require the user to
Enter 0 for plain text or 7 for
Enter a string.
Specify a level 0 to 15. Level 15
Enter 0 for plain text or 7 for
Enter a string up to 25 characters
password
Enter a keyword for the modes (exec,
range: 0 to 15. Levels 0, 1 and 15
A FTOS CLI keyword (up to 5
Return the command to its default
snmp-server
Security | 923