Configuring Lldpdu Intervals - Dell Force10 C150 Configuration Manual

Figure 26-12. Viewing All Information Advertised by Adjacent LLDP Agent
R1#show lldp neighbors detail
========================================================================
Local Interface Gi 1/21 has 1 neighbor
Total Frames Out: 6547
Total Frames In: 4136
Total Neighbor information Age outs: 0
Total Frames Discarded: 0
Total In Error Frames: 0
Total Unrecognized TLVs: 0
Total TLVs Discarded: 0
Next packet will be sent after 7 seconds
The neighbors are given below:
-----------------------------------------------------------------------
Remote Chassis ID Subtype: Mac address (4)
Remote Chassis ID:
Remote Port Subtype:
Remote Port ID:
Local Port ID: GigabitEthernet 1/21
Locally assigned remote Neighbor Index: 4
Remote TTL: 120
Information valid for next 120 seconds
Time since last information change of this neighbor:
Remote MTU: 1554
Remote System Desc:
. Force10 Operating System Version: 1.0. Force10 App
lication Software Version: 7.5.1.0. Copyright (c) 19
99-Build Time: Thu Aug 9 01:05:51 PDT 2007
Existing System Capabilities:
Enabled System Capabilities:
Remote Port Vlan ID:
Port and Protocol Vlan ID: 1, Capability: Supported, Status: Enabled
---------------------------------------------------------------------------
========================================================================

Configuring LLDPDU Intervals

LLDPDUs are transmitted periodically; the default interval is 30 seconds. You can configure a non-default
transmit interval—at CONFIGURATION level or INTERFACE level—using the command
(Figure 26-13).
00:01:e8:06:95:3e
Interface name (5)
GigabitEthernet 2/11
Force10 Networks Real Time Operating System Software
Repeater Bridge Router
Repeater Bridge Router
1
01:50:16
Link Layer Discovery Protocol | 595
hello