Dell Force10 C150 Configuration Manual page 530

When the bit is set, a 1 is placed in the OL column in the show isis database command output. In
Figure 23-9, the overload bit is set in both the Level-1 and Level-2 database because the IS type for the
router is Level-1-2
Figure 23-9. Command Example:
FTOS#show isis database
IS-IS Level-1 Link State Database
LSPID
B233.00-00
eljefe.00-00
eljefe.01-00
eljefe.02-00
Force10.00-00
IS-IS Level-2 Link State Database
LSPID
B233.00-00
eljefe.00-00
eljefe.01-00
eljefe.02-00
Force10.00-00
FTOS#
Debug IS-IS
Enter the
Use the following commands for specific IS-IS debugging.
Command Syntax
debug isis
debug isis adj-packets [
debug isis local-updates [
530 | Intermediate System to Intermediate System
LSP Seq Num
0x00000003
* 0x0000000A
* 0x00000001
* 0x00000001
0x00000002
LSP Seq Num
0x00000006
* 0x0000000E
* 0x00000001
* 0x00000001
0x00000004
debug isis
command in EXEC Privilege mode to debug all IS-IS processes.
]
interface
]
interface
show isis database
LSP Checksum LSP Holdtime
0x07BF 1074
0xF963 1196
0x68DF 1108
0x2E7F 1099
0xD1A7 1088
LSP Checksum LSP Holdtime
0xC38A 1110
0x53BF 1196
0x68DF 1108
0x2E7F 1099
0xCDA9 1093
Command Mode Purpose
EXEC Privilege View all IS-IS information.
EXEC Privilege View information on all adjacency-related activity
(for example, hello packets that are sent and
received).
To view specific information, enter one of the
following optional parameters:
•
interface:
information to view IS-IS information on that
interface only.
EXEC Privilege View information about IS-IS local update packets.
To view specific information, enter one of the
following optional parameters:
•
interface:
information to view IS-IS information on that
interface only.
ATT/P/OL
0/0/0
when overload bit
0/0/1
0/0/0
is set, 1 is listed in
0/0/0
the OL column.
0/0/0
ATT/P/OL
0/0/0
0/0/1
0/0/0
0/0/0
0/0/0
Enter the type of interface and slot/port
Enter the type of interface and slot/port