Configure Contact and Location Information using SNMP
You may configure system contact and location information from the Dell Force10 system or from the
management station using SNMP.
To configure system contact and location information from the Dell Force10 system:
Task
Identify the system manager along with this person's contact
information (e.g E-mail address or phone number). You may use
up to 55 characters.
Default: None
Identify the physical location of the system. For example, San
Jose, 350 Holger Way, 1st floor lab, rack A1-1. You may use up
to 55 characters.
Default: None
To configure the system from the manumitting station using SNMP:
Task
Identify the system manager along with this person's
contact information (e.g E-mail address or phone
number). You may use up to 55 characters.
Default: None
Identify the physical location of the system. For
example, San Jose, 350 Holger Way, 1st floor lab,
rack A1-1. You may use up to 55 characters.
Default: None
Command
snmp-server contact
snmp-server location
Command
snmpset -v version -c community
agent-ip sysContact.0 s "contact-info"
snmpset -v version -c community
agent-ip sysLocation.0 s "location-info"
Command Mode
CONFIGURATION
text
text
CONFIGURATION
Command Mode
CONFIGURATION
CONFIGURATION
Simple Network Management Protocol | 987