Displaying Mac Learning-Limited Interfaces; Learning Limit Violation Actions; Station Move Violation Actions - Dell Force10 C150 Configuration Manual

Displaying MAC Learning-Limited Interfaces

To display a list of all interfaces with a MAC learning limit:
Task
Display a list of all interfaces with a MAC learning
limit.

Learning Limit Violation Actions

Learning Limit Violation Actions are supported only on platform:
You can configure the system to take an action when the MAC learning limit is reached on an interface and
a new address is received using one of the following options with the
Task
Generate a system log message when the MAC learning
limit is exceeded.
Shut down the interface and generate a system log
message when the MAC learning limit is exceeded.

Station Move Violation Actions

Station Move Violation Actions are supported only on platform:
Note: On a C-Series or S-Series switch, Station Move Violation actions are supported on interfaces on
different line cards; they are not supported on interfaces on the same line card.
no-station-move
configure the system to take an action if a station move occurs using one the following options with the
mac learning-limit
Task
Generate a system log message
indicating a station move.
Shut down the first port to learn the
MAC address.
Shut down the second port to learn the
MAC address.
Shut down both the first and second port
to learn the MAC address.
566 | Layer 2
is the default behavior (see
command:.
Command Syntax
station-move-violation log
station-move-violation shutdown-original
station-move-violation shutdown-offending
station-move-violation shutdown-both
Command Syntax
show mac learning-limit
e
Command Syntax
learn-limit-violation log
learn-limit-violation shutdown
e c s
mac learning-limit no-station-move on page
Command Mode
EXEC Privilege
mac learning-limit
command:
Command Mode
INTERFACE
INTERFACE
564). You can
Command Mode
INTERFACE
INTERFACE
INTERFACE
INTERFACE