The Configuration Request And Response - Dell Force10 C150 Configuration Manual

Ftos configuration guide ftos 8.4.2.7 e-series terascale, c-series, s-series (s50/s25)

Hide thumbs Also See for Force10 C150:

Table of Contents

Response Format

Similarly, every response from FTOS begins with the XML declaration, followed by a "Response" tag:

<?xml version="1.0" encoding="UTF-8"?>

What goes between the Response tags depends on the type of response, as discussed next.

The Configuration Request and Response

To create a configuration request, you know from the introduction above that you put "<cli>" in place of

the "<Method>" tag in the schema, and you put "<configuration>" in place of "<Operation>". The number

of configuration commands in one request is not restricted.

Just as you enter commands in the CLI, you have the option of entering abbreviated commands in XML

messages. For example, instead of using the full

Also, spaces before or after the command are allowed, as shown in the following example.

The following sequence of XML tags shows the structure of a configuration request containing several

<?xml version="1.0" encoding="UTF-8"?>

ip access standard test2

seq 10 deny any

seq 20 permit host 10.1.1.1 count

seq 30 deny 10.2.0.0 /16

</configuration>

The response from FTOS, if the command executes successfully, is as follows:

<?xml version="1.0" encoding="UTF-8"?>

<responseType>NO_ERROR</responseType>

<responseSeverity>SEVERITY_INFO</responseSeverity>

<responseMsg>Xml request successfully processed.</responseMsg>

For details on responses to error conditions, see

This tag tells the CLI to invoke the EXEC PRIVILEGE mode.

These requests encapsulate "show" commands.

show running-config

XML Error Conditions and Reporting on page

statement, you can enter

FTOS XML Feature | 1157

Show Quick Links

Table of Contents