Connecting To A Hub; Figure 2-3. Router Connected To A Hub - NETGEAR RT210 Reference Manual

Reference Guide for the Model RT210/RT211 ISDN Routers

Connecting to a Hub

Your router can be connected to a hub as illustrated in
the NETGEAR Model EN108 10BASE-T hub.
LAN
MGR
5
Key:
1 Router
2 RJ-45 two-way splitter
3 10BASE-T Ethernet Cable (round) connected to Uplink port on hub
4 Switch on hub set to Uplink (or MDI) position
5 Hub
Figure 2-3. Router connected to a hub
To connect your router to a hub, follow these steps:
Make sure that your router is disconnected from the AC power.
1.
You can do this by either disconnecting the AC power adapter from your wall outlet or by
disconnecting the AC power adapter from the 9V DC port on your router.
2-10
1
ISDN VOICE
9v DC
TP
2
3
4
7287
Figure 2-3, where a router is integrated with
Installing and Connecting