Using The Configure Ports Menu; Using The Update Ports Form - NETGEAR RT210 Reference Manual

Using the Configure Ports Menu
The port configuration screens assist you in configuring and updating the ports.
Following are the menu command options and functions provided by the Configure Ports Menu:
• UnitNAME
This is a system-assigned number and can be either LAN or ISDN depending on the physical
port type.
• Status
This column displays whether the port is enabled or disabled.
• EDIT
Optionally highlight the port or type EDIT [port name] to change the parameters.
• ENABLE
Type ENABLE [port name] to reactivate a disabled port.
• DISABLE
Type DISABLE [port name] to deactivate a port.

Using the Update Ports Form

If any of the ISDN port parameters need to be altered, it is necessary to make the same change to
both available ISDN ports on the unit. Not changing both available ISDN ports on the unit can
interfere with normal operation.
Following are the menu command options and functions provided by the Update ISDN Ports
Form:
• PortID
This is a system-assigned name and cannot be changed.
• CLI
When Caller Line Identifier checking is enabled, only calls from ISDN numbers defined in
existing paths are accepted.
Default: NO
Menus and Commands
Reference Guide for the Model RT210/RT211 ISDN Routers
4-11