Advertisement
Appendix D
Upgrading Software
This appendix gives you instructions on how to install the latest version of internal software
through a locally attached PC or from a remote router of the same type.
The internal software on the NETGEAR Model RT210 and Model RT211 ISDN routers can be
updated as new versions are released by NETGEAR. There are two components of the internal
software: the routing software and TA software. You can update both using the procedures
described in the following sections.
Obtaining the Latest Version of Software
You can check to see what version of routing software is running on your router by typing VER
from within the built-in interface.
To find out about the latest version through the Internet, refer to
"World Wide
Web" in the Preface
for the NETGEAR home address. Information can be found on the Internet about the latest
software release and also a copy of the software that you can download to upgrade your router.
To find out about the latest version through Customer Support, refer to
"Customer
Support" in the
Preface to find the number for Customer Support in your area. If you do not have the latest
software release, a copy of the software can be mailed to you.
All software upgrades are subject to the release being compatible with the hardware that you are
using. Compatibility information is posted on the NETGEAR page on the Internet and is available
through Customer Support.
Upgrading Software
D-1
Advertisement
Troubleshooting
