Using The Update Ip Routes Form; Using The Update Ppp Custom Parameters Menu - NETGEAR RT210 Reference Manual

Reference Guide for the Model RT210/RT211 ISDN Routers

Using the Update IP Routes Form

You can Update IP Routes by using the IP Routes form.
Following are the menu command options and functions provided by the Update IP Routes form:
• Destination
The destination network or host IP address and subnet bits.
• Gateway
The IP address of another network device to which data should be sent for onward
transmission. This address is sometimes known as the next hop device and is not necessary for
a non-LAN path.
• Metric
The value that the routing protocol uses to cost the path.
• Path
The path over which the network or host can be reached.

Using the Update PPP Custom Parameters Menu

You can set and update PPP custom parameters by using the Update PPP Custom Parameters
menu. For further information on PPP custom parameters, refer to
Authentication Profiles."
Following are the command options and functions provided by the Update PPP Custom
Parameters menu:
• PAP
Enables or disables PAP (Password Authentication Protocol) checking.
Default: NO
• CHAP
Enables or disables CHAP (Challenge Handshake Authentication Protocol) checking.
Default: NO
4-14
Table E-4 in Appendix E, "PPP
Menus and Commands