Advertisement
Apply the appropriate feet (rubber or Velcro) to the bottom of your router as follows:
2.
Peel the back from each foot.
a.
Apply one to each of the four marked locations on the bottom of your router.
b.
If installing Velcro, clean the surface of the workbench or PC where your router is to
c.
be attached.
Peel the backing from the two Velcro pads and press them firmly in place.
d.
Align the Velcro pads on your router to the two Velcro pads on the workbench or PC
e.
and press firmly to attach the unit.
Figure 2-1
illustrates the router connected to ISDN (8); to a telephone, which is an analog device
(6); to the power adapter (5); and to a computer through a serial connection (11) and a LAN
connection (12).
The steps following the figure give you detailed instructions for making these connections.
Installing and Connecting
Reference Guide for the Model RT210/RT211 ISDN Routers
2-5
Advertisement
Troubleshooting
