Using The Quit Command - NETGEAR RT210 Reference Manual

• -N
Number of times to send the echo request packet. [4]
• -T
Transmit packets continuously. Halt with space bar.
• -W
Time to wait for a response (range 1 to 3276). [5 seconds]
If the command is used without any options, the target IP address is pinged five times and the
results displayed on the screen.

Using the QUIT Command

You can use the QUIT command to close down the current management session. If you are
connected to a remote device, the network connection is closed and control passes back to the
original unit.
Menus and Commands
Reference Guide for the Model RT210/RT211 ISDN Routers
4-21