Advertisement
Reference Guide for the Model RT210/RT211 ISDN Routers
•
IPAddr&Mask
Allows entry of the IP address and number of netmask bits for this interface for numbered
links. If a netmask is not specified, the unit adds the default mask for the class of address
configured. This address should be part of the inter-router network addressing scheme.
Default: 0.0.0.0
•
PPPProf
This profile determines the operating mode of PPP for this path. Selecting CUSTOM
displays the Configuration PPP Form that enables you to set up a custom profile. For
information about various options when setting up a custom profile,
Appendix E, "PPP Authentication
Default: Custom
•
PPP OutgoingPw
This is the password sent to be authenticated by the other unit in PAP connections. When
entered, the password is displayed as a series of asterisks.
Default: No password
•
PPP IncomingPw
This is the password matched to the received password to authenticate the other unit in
PAP connections. When entered, the password be displayed as a series of asterisks.
Default: No password
•
PPP Secret
This is the secret used to authenticate CHAP connections. When entered, the password is
displayed as a series of asterisks.
Default: No secret
4-10
Profiles."
refer to Table E-1
in
Menus and Commands
Advertisement
Troubleshooting
