Advertisement
Chapter 4
Menus and Commands
The NETGEAR Model RT210 and Model RT211 ISDN routers have a built-in software
management system that allows you to configure and manage your router. This section shows the
menu hierarchy and describes the menus and forms.
For information on the commands that move you through the menus and screens, refer to
Table
3-1,
Table
3-2, and
Table 3-3
in
Chapter 3, "Configuring the
Router."
Using the Menus
The Main Menu is displayed after you have entered a valid password on the password screen. The
default password is PASSWORD. You have three tries to enter the password correctly. If you do
not succeed in three tries, you are disconnected from the manager port.
After initial logon, the default password can be changed from the Update System Parameters form
(refer to
"Using the Update System Parameters
Form" on
page
4-5).
The Main Menu displays a list of menus that you use to configure and manage your router.
Menus and Commands
4-1
Advertisement
Troubleshooting
