Hardware Installation; Connecting The Router - NETGEAR RT328 Getting Started
Isdn router
Hide thumbs
Also See for RT328:
- Installation manual (12 pages) ,
- Reference manual (142 pages) ,
- Reference manual (142 pages)
Table of Contents
Advertisement
Chapter 2
Hardware Installation
This chapter provides instructions on how to install and connect the Model RT328 ISDN Router
to a PC for operation and configuration.
Connecting the Router
Even if your Model RT328 router is to be installed in a predominately Macintosh or UNIX
environment, you can connect it to a PC and configure it using FirstGear, as described in
Chapter 3, "Configuring the Router Using
FirstGear." After your router is configured, you can
then connect it back into your UNIX or Macintosh environment.
Follow the diagram in
Figure 2-1
to find out about making router connections. For further
information about making each connection, refer to the sections that follow.
Hardware Installation
2-1
Advertisement
Table of Contents
