Using The Quick-Start Local Boot Procedure; Using The Worksheets - Nortel Remote Access for AN and Passport ARN Routers Configuration Manual

Using the Quick-Start Local Boot Procedure

The Quick-Start procedure connects a new AN/ANH or ARN router to a managed
network using the Local Boot option and a default configuration file.
If you have read Chapter 1 and want to use Quick-Start to connect an AN/ANH or
ARN router to Site Manager for the first time, use the worksheets in this appendix
to gather the network information required to complete the procedure. Be sure to
fill out the worksheets before you begin the Quick-Start procedure.
Topic
What Is Quick-Start?

Using the Worksheets

Running the Quick-Start Script
Note: The worksheets in this appendix apply only to AN, ANH, and ARN
routers. See Quick-Starting Routers for all other Nortel Networks routers.
308614-14.20 Rev 00
Appendix C
Page
C-2
C-2
C-13
C-1