Table of Contents
Advertisement
You can use Site Manager to create the BootP client interface table.
You do this
1. In the Configuration Manager window,
choose Protocols.
2. Choose IP .
3. Choose BOOTP .
4. Choose Relay Agent Interface Table.
5. Click on Client I/F (interface).
6. Click on Add.
7. Set the following parameters:
•
•
Click on Help or refer to the parameter
descriptions beginning on page A-8.
8. Click on OK.
9. Click on Done.
* Click on Help or see Configuring SNMP , BootP, and DHCP Services for a description of the
parameters in the BOOTP Relay Agent Interface Table window. Make sure that the Timeout Secs.
parameter is set to the default, 0.
308614-14.20 Rev 00
IP Address
DLCI Number
Configuring Netboot Services with Site Manager
Site Manager Procedure
System responds
The Protocols menu opens.
The IP menu opens.
The BOOTP menu opens.
The BOOTP Relay Agent Interface Table
window opens.*
The BOOTP Client Interface Table
window opens.
The BOOTP Client Interface Address
window opens.
The BOOTP Client Interface Table
window lists the client IP interface and the
DLCI number you added.
You return to the BOOTP Relay Agent
Interface Table window.
3-15
Advertisement
Table of Contents
