Table 2-1. Bootpd Tags For A Router Host Name; Table 2-2. Bootpd Tags For A Kernel File Name - Nortel Remote Access for AN and Passport ARN Routers Configuration Manual

Configuring Remote Access for AN and Passport ARN Routers
Table 2-1.
Tag
tc
Table 2-2.
Tag
hd
bf
bs
2-6
BootPD Tags for a Router Host Name
Required or
Optional Value
Optional Table continuation -- a pointer to
another location in the same file
for additional information. This tag
points to information that is
common to all routers that use
BootPD. If the information
contradicts information in a
specific host-name definition,
BootPD uses the information in
that definition.
BootPD Tags for a Kernel File Name
Required
or Optional Value
Required Home directory -- the directory on
the workstation containing the
kernel files. By default, the Image
Builder writes its files to the
directory specified in the example.
The rel<number> directory
contains the current BayRS
release. If you change the default
or move the files to another
directory, specify that directory.
Required Boot file -- the name of the kernel
file.
Required Boot size -- the size of the kernel
file in 512-byte blocks. If you
specify auto as the size, the BootP
server calculates the size of the
file for each BootP request.
(continued)
Example
tc=general
Example
hd=/$HOME/.builder_dir/
rel120/an
bf=krnl_an.exe
bs=auto
(continued)
308614-14.20 Rev 00