Id Type And Content Examples; Table 50 Local Id Type And Content Fields; Table 51 Peer Id Type And Content Fields - Nortel BSR252 Configuration - Basics

Configure the ID type and content in the VPN Branch Office Rule Setup screen
(see Figure 71 on page
or an e-mail address. The content is the IP address, domain name, or e-mail
address.

Table 50 Local ID type and content fields

Local ID type=
IP
DNS
E-mail
The domain name or e-mail address that you use in the Content field is used for
identification purposes only and does not need to be a real domain name or e-mail
address.

Table 51 Peer ID type and content fields

Peer ID type=
IP
DNS
E-mail
The domain name or e-mail address that you use in the Content field is used for
identification purposes only and does not need to be a real domain name or e-mail
address. The domain name also does not have to match the IP address of the remote
IPSec router or what you configure in the Secure Gateway Address field below.

ID type and content examples

Two IPSec routers must have matching ID type and content configuration in order
to set up a VPN tunnel.
222). The type of ID can be a domain name, an IP address,
Content=
Type the IP address of your computer or leave the field blank to have
the Business Secure Router automatically use its own IP address.
Type a domain name (up to 31 characters) by which to identify this
Business Secure Router.
Type an e-mail address (up to 31 characters) by which to identify this
Business Secure Router.
Content=
Type the IP address of the computer with which you make the VPN
connection or leave the field blank to have the Business Secure
Router automatically use the address in the Secure Gateway field.
Type a domain name (up to 31 characters) by which to identify the
remote IPSec router.
Type an e-mail address (up to 31 characters) by which to identify the
remote IPSec router.
Nortel Business Secure Router 252 Configuration — Basics
Chapter 13 VPN 219