Router Protocol Worksheets - Nortel Remote Access for AN and Passport ARN Routers Configuration Manual

Configuring Remote Access for AN and Passport ARN Routers
Global Information Worksheet
Prompt
Enter (FTP) volume
number [1]:
Do you want to enable TI
TELNET (y/n) [n]:
Do you wish to save this
configuration to a file?
(y/n) [y]
Enter filename
[startup.cfg]:
ARN only: Do you wish to
set up another port/
module? (y/n) [y]

Router Protocol Worksheets

This section contains the following worksheets, with the prompts and options for
routing protocol choices on the Global Information worksheet:
• RIP Worksheet (page
• OSPF Worksheet (page
• Static Route to Site Manager Worksheet (page
RIP Worksheet
Prompt
Should RIP listen to the
default route? (y/n) [n]:
C-6
(continued)
Options
The script automatically selects 1 as the FTP
default volume.
y(es)
n(o)
Enabling Telnet is optional.
y(es)
n(o)
Nortel Networks recommends using the
default file name, startup.cfg .
y(es)
n(o)
C-6)
C-7)
Options
y(es)
n(o)
Note: RIP listens to the static route (a
specific network or subnet route to the Site
Manager location). Answering y(es) to this
prompt forces RIP to also listen to the
default route (0.0.0.0). This is useful when
the RIP updates that the router receives do
not include the static route.
Your Response
Press the [Return] key.
Press the [Return] key.
Type n and press the
[Return] key.
C-9)
Your Response
308614-14.20 Rev 00