Nortel Remote Access for AN and Passport ARN Routers Configuration Manual page 94

Configuring Remote Access for AN and Passport ARN Routers
Parameter: Connector State
Path: Configuration Manager > Protocols > Global Protocols > Net Boot > Interfaces
Default: Enable
Options: Enable
Function: Enables or disables Netboot on this interface. When set to Enable, any settings
specified for the other four parameters in the Netboot Interfaces window appear.
When set to Disable, Site Manager disregards the other parameters and the
router cannot Netboot.
Instructions: If you do not want Site Manager to use the other parameters on the Netboot
Interfaces window, set this parameter to Disable. If you want Site Manager to
use any of the other parameter settings in the Netboot Interfaces window, set
this parameter to Enable.
MIB Object ID: 1.3.6.1.4.1.18.3.3.2.10.3.1.1
A-6
|
Disable
308614-14.20 Rev 00