Procedure Job Aid: Installing A Module; Installing Ac Power Modules; Nortel Ethernet Routing Switch 8600; Quick Start - Nortel NN46205-310 Quick Start Manual

Procedure job aid: Installing a module

Figure 2
Installing a module in a 8010co chassis
Figure 3
Installing a module in a 8003, 8006, and 8010 chassis

Installing AC power modules

Install AC power modules in the left-most bay to supply AC power to the
chassis.
ATTENTION
The 8006, 8010, and 8010co chassis have three power supply bays that are
numbered 1, 2, and 3 from left to right as viewed from the front of the chassis.
The 8003 chassis has 2 power supply bays that are numbered 1 and 2 from left
to right.
Copyright © 2008 Nortel Networks
.

Nortel Ethernet Routing Switch 8600

Quick Start

NN46205-310 02.01 Standard
30 May 2008
Installing AC power modules 43