Connecting Power Cables; Nortel Secure Router 4134; Quick Start - Nortel Secure 4134 Quick Start Manual

40 Installing the Secure Router 4134 chassis and hardware components
4
5

Connecting power cables

The following two types of power supply modules are available for the
Secure Router 4134:
•
•
Use the procedures in this section to connect AC and DC power cables to a
Secure Router 4134.
Copyright © 2007, Nortel Networks
.
Grasping the edges of the VPN/IPSec module, pull the module up
and out of the slot in which it is seated.
If you are not installing a VPN/IPSec module at this time, replace
the service access panel.
AC power supply module (standard or PoE) requiring an external AC
power source
DC power supply module requiring an external DC power source

Nortel Secure Router 4134

NN47263-100 01.01 Standard
10.0 16 July 2007
—End—

Quick Start