Creating Bootp Relay Agent Forwarding Tables; 308614-14.20 Rev 00 - Nortel Remote Access for AN and Passport ARN Routers Configuration Manual

Configuring Remote Access for AN and Passport ARN Routers
You can use Site Manager to enable BootP relay on an interface.
You do this
1. In the Configuration Manager window,
click on the connector on which you want
to enable BootP relay.
2. Choose Edit Circuit.
3. Choose Protocols.
4. Choose Add.
5. Choose BOOTP .
6. Choose File.
7. Choose Exit.

Creating BootP Relay Agent Forwarding Tables

You must create a BootP relay agent forwarding table for every router that passes
BootP traffic between the AN/ANH or ARN router and the BootP server.
The BootP relay agent forwarding table allows you to specify the IP interface that
receives the incoming BootP request packets, and the associated IP interface that
forwards them. You can add multiple pairs of incoming and outgoing interfaces to
support connections to multiple routers in your network.
3-12
Site Manager Procedure
System responds
The Edit Connector window opens.
The Circuit Definition window opens.
The Protocols menu opens.
The Select Protocols window opens.
The BOOTP menu opens.
The File menu opens.
You return to the Configuration Manager
window.

308614-14.20 Rev 00