Connections-Using Your Instrument With Other Devices; Connecting A Microphone Or Guitar ([Mic/Guitar Input] Jack) - Yamaha PSR-SX900 Owner's Manual

Hide thumbs Also See for PSR-SX900:
Table of Contents

Advertisement

Connections—Using Your Instrument with
Other Devices
This chapter covers the connections of this instrument to other devices. To see where the connectors are located on
the instrument, refer to pages 16–19.
CAUTION
Before connecting the instrument to other electronic components, turn off the power of all components. Also,
before turning any components on or off, make sure to set all volume levels to minimum (0). Otherwise, dam-
age to the components, electrical shock, or even permanent hearing loss may occur.

Connecting a Microphone or Guitar ([MIC/GUITAR INPUT] jack)

By connecting a microphone, you can sing along with your keyboard performance or with Song playback, as well as record
your vocal performance to an Audio Song. You can also connect a guitar to the [MIC/GUITAR INPUT] jack, and output
the sound from the speakers of this instrument.
Connecting a microphone or guitar to the instrument
1
Before connecting a microphone or guitar, set the [GAIN] knob
to the minimum position.
2
Set the [MIC GUITAR] switch.
When connecting a microphone, set it to "MIC." When connecting a guitar, set it to
"GUITAR."
100
PSR-SX900/SX700 Owner's Manual
2
3
(standard 1/4"
phone plug)
NOTE
Make sure to use a conventional
dynamic microphone.
NOTE
• When you are not using a micro-
phone/guitar, disconnect the cable
from the [MIC/GUITAR INPUT] jack.
• Always set the [GAIN] knob to mini-
mum when nothing is connected to
the [MIC/GUITAR INPUT] jack. Since
the [MIC/GUITAR INPUT] jack is
highly sensitive, it may pick up and
produce noise even when nothing is
connected.
NOTE
When you use a guitar with active pick-
ups, set the [MIC GUITAR] switch to
"MIC," since doing so can reduce
noise.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Psr-sx700

Table of Contents