Setting The Appropriate Character Code For Song File Names - Yamaha TransAcoustic TA3 Owner's Manual

Setting the appropriate Character Code for Song file names

TA3 SH3 SC3
If the Song in the connected USB flash drive cannot be called up, you may need to select the Character Code which is
compatible with the file/folder name, from the following two settings. The default setting is "Int."
• Int (International): For playing back Songs with names using western European characters (including umlaut or
diacritic marks).
• JA (Japanese): For playing back Songs with names using Japanese characters and alphabets (excluding umlaut or
diacritic marks).
• To set to "JA"
While holding down the Menu button and Button 2, turn on
the power by pressing the [
appears on the display.
• To set to "Int"
While holding down Button 2, turn on the power by pressing
the [ ] (Standby/On) switch. "Int" appears on the display.
P
NOTE
This setting is maintained even when the power is turned off.
] (Standby/On) switch. "JA"
P
2. Press 1. Hold down
2. Press 1. Hold down
TA3 SH3 SC3 Owner's Manual
3
37