Table of Contents
Advertisement
5
6
K
B
a
5
6
K
B
a
When the WAN connection is broken, router will try to keep the connection with 56K mode if
it is enabled. After WAN connection is recovered, router will disconnect the 56K connection
automatically.
Available settings are explained as follows:
Item
56K Backup
WAN Connection
Detection
Reset USB
Vigor1000 Series User's Guide
c
k
u
p
c
k
u
p
Description
Enable 56K Backup- Check this box to enable such
function.
Phone Number- Type the phone number offered by the ISP
for dial-out connection.
PPP Username- Type the PPP username (optional).
PPP Password- Type the PPP password (optional).
Mode- Such function allows you to verify whether network
connection is alive or not through ARP or Ping Detect.
Choose ARP or Ping Detect for the system to execute for
WAN detection.
Ping IP- If you choose Ping Detect as detection mode, you
have to type IP address in this field for pinging.
Click this button to reset the USB port.
79
Advertisement
Table of Contents
