Table of Contents
Advertisement
Available settings are explained as follows:
Item
Ethernet Type
Value
If you choose VLAN ID as QCE Type, you have to type the ID number for it and specify
traffic class from Low, Normal, Medium and High.
If you choose TCP/UDP Port as QCE Type, you have to type the port number for it and
specify traffic class from Low, Normal, Medium and High.
Available settings are explained as follows:
Item
TCP/UDP Port
TCP/UDP Port
Range
Vigor1000 Series User's Guide
Description
Either 8~63 ASCII characters, such as 012345678(or 64
Hexadecimal digits leading by 0x, such as
"0x321253abcde...").
Description
Click Single or Range. If you select Range, you have to
type in the starting port number and the end porting number
on the boxes below.
Type in the starting port number and the end porting
number here if you choose Range as the type.
131
Advertisement
Table of Contents
