Table of Contents
Advertisement
Protocol
WAN IP
Start Port
End Port (optional)
Local Host
Local Port (optional)
Click OK to save the settings.
Specify the transport layer protocol. It could be TCP, UDP
and TCP+UDP.
Specify one WAN IP address to be used by such profile.
The default setting is ALL, which mean such profile can be
applied for all the WAN IP addresses.
Specify the starting port number of the service offered by
the local host.
Specify the ending port number of the service offered by
the local host.
Enter the private IP address of the local host.
If it is configured, the forwarded traffic is mapped to this
port on the local host.
96
Vigor1000 Series User's Guide
Advertisement
Table of Contents
