Table of Contents
Advertisement
Available settings are explained as follows:
Item
Enable
Name
Source
Destination
Protocol
Source Port / Destination
Port
Source Address /
Destination Address
Source MAC Address
Action
Description
Check the box to enable such rule.
Type a name of the rule for identification.
Specify the interface for the starting point.
Specify the interface for the ending point.
Specify the protocol(s) which this filter rule will apply to.
Type a fixed port number or a range of port number for
such rule. Available value is 1 ~ 65535.
Type WAN IP or LAN IP address based on the WAN or
LAN interface specified in Source / Destination fields.
Note that the format for this field must be "address[/mask]",
e.g, 192.168.1.123 or 172.16.9.0/24.
Specify the MAC address for the packets.
Choose the action to perform for the filtered packet.
Accept – Packets matching with such rule can pass through
the router.
Drop - Packets matching with such rule will be discarded
immediately.
Reject - Packets matching with such rule cannot pass
through the router and become packets with TCP reset or
ICMP port unreachable packets.
116
Vigor1000 Series User's Guide
Advertisement
Table of Contents
