Table of Contents
Advertisement
5.
Setup a pre-shared key, which must be the same as in Vigor2820.
6.
Setup the Local Identity and Remote Identity, which are for Vigor1000 and Vigor2820
respectively.
During IPSec Aggressive mode negotiation, the VPN client must send its identity to the
VPN server for verification. The VPN client may also verify the identity of the VPN
server, which is optional. In this example we setup 'Vigor1000' as the identity of
Vigor1000, and 'vigor2820' as the identity of Vigor2820.
7.
Enter Vigor1000's private network in the Local Network / Mask field. Enter
Vigor2820's private network in the Remote Network / Mask field.
8.
Use default value "Automatic" for IKE phase 1 and phase 2 proposals.
9.
Click OK.
10. Accessing the VPN network of Vigor2820 from a PC behind Vigor1000 to initiate the
VPN connection, for example, ping 192.168.1.x from a PC (192.168.30.x). Vigor1000
will be triggered to dial the IPSec VPN to Vigor2820. After the VPN is connected, you
can monitor the status.
Vigor1000 Series User's Guide
39
Advertisement
Table of Contents
