Table of Contents
Advertisement
Ethernet
Choose IPv4 as the Frame Type. You will see IP Parameters on the bottom of the page.
If you choose ICMP as IP Protocol Filter, you will get the page as the following:
Item
IP Parameters
Vigor1000 Series User's Guide
Specify whether frames can hit the action according to their
ARP/RARP protocol address space (PRO) settings.
0: ARP/RARP frames where the protocol address space is
equal to IP (0x800) must not match this entry.
1: ARP/RARP frames where the protocol address space is
equal to IP (0x800) must match this entry.
Any: Any value is allowed.
Description
Source IP-Specify the Source IP filter for this ACE.
Any: No source IP filter is specified.
Host: Source IP filter is set to Host. Specify the source IP
address in the Source IP Address field that appears.
Network: Source IP filter is set to Network. Specify the
source IP address and source IP mask in the Source IP
Address and Source IP Mask fields that appear.
Source IP Address-Type the Source IP Address here. This
option is available when you choose Host or Network as
Source IP.
Source IP Mask-Type the Source IP Mask here. This
option is available only when you choose Network as
source Source IP.
107
Advertisement
Table of Contents
