Table of Contents
Advertisement
Item
WAN Connection
Detection
Clone MAC Address
After finishing all the settings here, please click OK to activate them.
P
P
T
P
/
L
2
T
P
P
P
T
P
/
L
2
T
P
To use PPTP/L2TP as the accessing protocol of the internet, please choose PPTP/L2TP from
Connection Type drop down menu. The following web page will be shown.
Description
Idle Time Out - Set the timeout for breaking down the
Internet after passing through the time without any action.
When you choose Connect on Demand, you have to type
value here.
MTU Size- It means Max Transmit Unit for packet. The
default setting will be specified by the system
automatically.
Fixed IP (IPCP)- Usually ISP dynamically assigns IP
address to you each time you connect to it and request. In
some case, your ISP provides service to always assign you
the same IP address whenever you request. In this case, you
can fill in this IP address in the Fixed IP field. Please
contact your ISP before you want to use this function. Click
Yes to use this function.
Fixed IP Address (IPCP)- Type in a fixed IP address in
the box if you click Yes for Fixed IP(IPCP).
Service Name – Some ISP might need such information for
connection. Just contact to your dealer/ISP if it is required.
Mode - Such function allows you to verify whether network
connection is alive or not through ARP Detect or Ping
Detect. Choose ARP Detect or Ping Detect for the system
to execute for WAN detection.
Ping IP - If you choose Ping Detect as detection mode, you
have to type IP address in this field for pinging.
Enable - It is available when the box of Enable is checked.
Click Clone MAC Address. The result will be displayed in
the field of MAC Address.
66
Vigor1000 Series User's Guide
Advertisement
Table of Contents
