Table of Contents
Advertisement
Available settings are explained as follows:
Item
Configure via Push
Button
Configure via Client
PinCode
After finishing the settings here, please click Next.
Description
Click Start PBC to invoke Push-Button style WPS setup
procedure. The router will wait for WPS requests from
wireless clients about two minutes. The WPS LED on the
router will blink fast when WPS is in progress. It will return
to normal condition after two minutes. (You need to setup
WPS within two minutes)
Type the PIN code specified in wireless client you wish to
connect, and click Start PIN button. The WLAN LED on
the router will blink fast when WPS is in progress. It will
return to normal condition after two minutes. (You need to
setup WPS within two minutes)
24
Vigor1000 Series User's Guide
Advertisement
Table of Contents
