Available settings are explained as follows:
Item
Enable
Disable
Limitation List
Specific Limitation
Add
Edit
Delete
When you finish adding a new session limit, simply click OK.
Vigor1000 Series User's Guide
Description
activate the function of limit session, simply click Enable
and set the default session limit.
Click this button to close the function of limit session.
Default Sessions Limit- Defines the default session
number used for each computer in LAN.
Displays a list of specific limitations that you set on this
web page.
Start IP - Defines the start LAN IP address for limit
session.
End IP- Defines the end LAN IP address for limit session.
Sessions Limit - Defines the available session number for
each host in the specific range of IP addresses. If you do not
set the session number in this field, the system will use the
default session limit for the specific limitation you set for
each index.
Adds the specific session limitation onto the list above.
Allows you to edit the settings for the selected limitation.
Remove the selected settings existing on the limitation list.
125