Table of Contents
Advertisement
Available settings are explained as follows:
Item
Enable
Match Prefix
Mode
OP Number
Min Len
Max Len
Route
Description
Check this box to invoke this setting.
The phone number set here is used to add, strip, or replace
the OP number.
None - No action.
Add - When you choose this mode, the OP number will be
added with the prefix number for calling out through the
specific VoIP interface.
Strip - When you choose this mode, the OP number will be
deleted by the prefix number for calling out through the
specific VoIP interface. Take the above picture (Prefix
Table Setup web page) as an example, the OP number of
886 will be deleted completely for the prefix number is set
with 886.
Replace - When you choose this mode, the OP number
will be replaced by the prefix number for calling out
through the specific VoIP interface. Take the above picture
(Prefix Table Setup web page) as an example, the prefix
number of 03 will be replaced by 8863. For example: dial
number of "031111111" will be changed to
"88631111111" and sent to SIP server.
The front number you type here is the first part of the
account number that you want to execute special function
(according to the chosen mode) by using the prefix
number.
Set the minimal length of the dial number for applying the
prefix number settings. Take the above picture (Prefix
Table Setup web page) as an example, if the dial number is
between 7 and 9, that number can apply the prefix number
settings here.
Set the maximum length of the dial number for applying
the prefix number settings.
Choose the one that you want to enable the prefix number
settings from the saved SIP accounts. Please set up one SIP
198
Vigor1000 Series User's Guide
Advertisement
Table of Contents
