Table of Contents
Advertisement
IP Parameters
ICMP Parameters
Choose IPv4 as the Frame Type. You will see IP Parameters on the bottom of the page.
If you choose UDP as IP Protocol Filter, you will get the page as the following:
Dest IP Filter-Specify the destination IP filter for this
ACE.
Any: No destination IP filter is specified.
Host: Destination IP filter is set to Host. Specify the
destination IP address in the Dest IP Address field that
appears.
Network: Destination IP filter is set to Network. Specify
the destination IP address and destination IP mask in the
DIP Address and Dest IP Mask fields that appear.
Dest IP Address-Type the Dest IP Address here. This
option is available when you choose Host or Network as
destination Dest IP.
Dest IP Mask-Type the Dest IP Mask here. This option is
available only when you choose Network as destination
Dest IP.
ICMP Type Filter-Specify the ICMP filter for this ACE.
Any: No ICMP filter is specified.
Specific: If you want to filter a specific ICMP filter with
this ACE, you can enter a specific ICMP value. A field
for entering an ICMP value appears.
ICMP Type Value-If you choose Specific as ICMP Type
Filter, you have to type the ICMP Type Value manually.
The allowed range is 0 to 255. A frame meeting this ACE
matches this ICMP value.
ICMP Code Filter-Specify the ICMP code filter for this
ACE.
Any: No ICMP code filter is specified (ICMP code filter
status is "don't-care").
Specific: If you want to filter a specific ICMP code filter
with this ACE, you can enter a specific ICMP code
value. A field for entering an ICMP code value appears.
ICMP Code Value-If you choose Specific as ICMP Code
Filter, you have to type the ICMP Type Value manually.
The allowed range is 0 to 255. A frame meeting this ACE
matches this ICMP value.
108
Vigor1000 Series User's Guide
Advertisement
Table of Contents
