Table of Contents
Advertisement
Available settings are explained as follows:
Item
Enable
Username
Full Name
Password
Confirm Password
Allow Disk Sharing
Allow IPSEC/L2TP
Allow PPTP
Vigor1000 Series User's Guide
Description
Check this box to enable such user profile.
Type a name for this user.
Type full name for this user.
Type the password for this user.
Type the password again for confirmation.
Check this box to have the remote user share the disk
information.
Check this box to let the remote user connecting to this
device through IPSEC/L2TP.
Check this box to let the remote user connecting to this
device through PPTP. When such user profile needs to
have PPTP LAN to LAN connection, the following items
must be adjusted.
Allowed Dial-In Type – Specify which dial-in type will be
used for PPTP connection.
Assign Static IP Address – If you choose Remote Dial-in
Client as Allowed Dial-In type, you can assign a fixed IP
address.
Local Network/Mask – If you choose LAN to LAN as
Allowed Dial-In Type, you have to type the IP address as
149
Advertisement
Table of Contents
