Table of Contents
Advertisement
Available settings are explained as follows:
Item
L2TP Settings
Vigor1000 Series User's Guide
Description
Username -Type in the username provided by ISP in this
field.
Password- Type in the password provided by ISP in this
field.
Server Address- Type in the IP address for PPTP /L2TP
server.
WAN IP Network Settings- You can choose Static IP or
DHCP as WAN IP network setting.
IP Address- Type the IP address if you choose Static IP as
the WAN IP network setting.
Subnet Mask- Type the subnet mask if you chose Static IP
as the WAN IP.
Primary DNS Server- You must specify a DNS server IP
address here because your ISP should provide you with
usually more than one DNS Server. If your ISP does not
provide it, the router will automatically apply default DNS
Server IP address: 194.109.6.66 to this field.
Secondary DNS Server-You can specify secondary DNS
server IP address here because your ISP often provides you
more than one DNS Server. If your ISP does not provide it,
the router will automatically apply default secondary DNS
67
Advertisement
Table of Contents
