Table of Contents
Advertisement
Sender IP Filter
Sender IP Address
Sender IP Mask
Target IP Filter
Target IP Address
Target IP Mask
ARP SMAC Match
Vigor1000 Series User's Guide
Specify the sender IP filter for this ACE.
Choose Any to filter all of the packets.
Choose Host to filter the packets from the host with the
address typed in Sender IP Address filed.
Choose Network to filter the packets within the network
defined in Sender IP Address and Sender IP Mask fields.
Type the Sender IP Address here. This option is available
when you choose Host or Network as Sender IP Filter.
Type the Sender IP Mask here. This option is available only
when you choose Network as Sender IP Filter.
Specify the target IP filter for this specific ACE.
Choose Any to filter all of the packets.
Choose Host to filter the packets from the host with the
address typed in Target IP Address filed.
Choose Network to filter the packets within the network
defined in Target IP Address and Target IP Mask fields.
Type the Target IP Address here. This option is available
when you choose Host or Network as Target IP Filter.
Type the Target IP Mask here. This option is available only
when you choose Network as Target IP Filter.
Specify whether frames/packets can meet the action
according to the sender hardware address field (SHA)
settings.
0: means sender hardware address is not equal to the SMAC
address.
1: means sender hardware address is equal to the SMAC
address.
Any: means any value is allowed.
105
Advertisement
Table of Contents
