Table of Contents
Advertisement
VoIP WAN VLAN Setting Enable VoIP WAN Setup - Check the box to enable VoIP
IPTV WAN VLAN
Setting
Management WAN
VLAN Setting
LAN VLAN Setting
Vigor1000 Series User's Guide
WAN configuration.
VoIP WAN VLAN ID- Voice sent out through the WAN
port will be tagged with VLAN ID number specified here.
The range of ID number you can type is from 2 - 4096.
VoIP WAN Setting – Click this link to open VoIP WAN
setting.
Enable IPTV WAN Setup- Check the box to enable IPTV
WAN configuration.
IPTV WAN VLAN ID- IPTV signal sent out through the
WAN port will be tagged with VLAN ID number specified
here. The range of ID number you can type is from 2 -
4096.
IPTV WAN Setting – Click this link to open IPTV WAN
setting.
Enable Management WAN Setup- Check the box to
enable Management WAN configuration.
Management WAN VLAN ID - Data sent out through the
WAN port will be tagged with VLAN ID number specified
here. The range of ID number you can type is from 2 -
4096.
Management WAN Setting – Click this link to open
Management WAN setting.
LAN/NAT- Such value is constant and fixed. All the data
will be transmitted by NAT through WAN port.
Bridge 1/2/3- LAN port (P2-P4) selected here will ask a
Public IP address from ISP for transmitting data from PC
directly without NAT. The range of ID number you can
type is from 2 – 4096. Each ID setting must be unique and
different with WAN VLAN ID.
73
Advertisement
Table of Contents
